Racingjunk Forums

Racingjunk Forums (https://www.racingjunk.com/forums/index.php)
-   Engine Tech (https://www.racingjunk.com/forums/forumdisplay.php?f=9)
-   -   Fuel pump block off plate / pushrod (https://www.racingjunk.com/forums/showthread.php?t=24103)

fla1976 05-02-2009 09:45 AM

wooden cam
 
Is your wooden cam anything like a "Inflate-a-cam"? All you have to do is inflate the cam with a grease gun for more lift.

oldandtired 05-02-2009 12:04 PM

Re: wooden cam
 

Originally Posted by fla1976
Is your wooden cam anything like a "Inflate-a-cam"? All you have to do is inflate the cam with a grease gun for more lift.

FLA that's great!
When people ask me what kind of cam do I have in the car, I say a wooden cam. They look at you funny and start to walk away when you make the motor sound," you know wudden, wudden, wudden".
Gets them every time!!

Tod74 05-02-2009 12:51 PM

When I was in High school a friend of mine had a Nova with a mild small block , but it sounded good. People would ask him "How big is the cam?" he would hold his hands out about a foot and a half apart to show the length and then make a circle out of his fingers to show how big around....anyone asking about carburator size got the same type of answer...lol

desoto30 05-03-2009 11:41 AM

Re: wooden cam
 

Originally Posted by oldandtired

Originally Posted by fla1976
Is your wooden cam anything like a "Inflate-a-cam"? All you have to do is inflate the cam with a grease gun for more lift.

FLA that's great!
When people ask me what kind of cam do I have in the car, I say a wooden cam. They look at you funny and start to walk away when you make the motor sound," you know wudden, wudden, wudden".
Gets them every time!!

lol thought you were going to say wooden cam-wooden work!

Tod74 05-03-2009 01:12 PM

Is that wooden cam a "3/4 CAM" ?...."Full Race"

fla1976 05-03-2009 02:19 PM

Wooden cam
 
If the wooden cam were a favorite, I bet it would be "Poplar". :oops:

suicidebomb 05-03-2009 02:27 PM

Re: Wooden cam
 

Originally Posted by fla1976
If the wooden cam were a favorite, I bet it would be "Poplar". :oops:

:lol: :lol:

Tod74 05-04-2009 03:15 AM

Re: Wooden cam
 

Originally Posted by fla1976
If the wooden cam were a favorite, I bet it would be "Poplar". :oops:

boo hisss..booo

kbartley 05-04-2009 04:00 AM

FUEL PUMP BLOCKOFF
 
I tell those who ask that my cam is so big I had to beat it into the block w/ a sledgehammer. Kris

THERATTLER 05-04-2009 04:27 AM

I tell them that I put a big block cam and lifters in my small block , when they ask "HOW" , I tell them I had it bored out for it but I had to get special push rods,,, , they usually go away and leave me alone :D


All times are GMT -8. The time now is 09:58 AM.