DONT THINK IT WILL FIT IN A OIL SOAKED BOX :lol:

OUCH.....oK $59,995

hmm got any pics???
any specs etc.
looking for a camaro but ill bite at anything .
cheaper to buy already built than to start from scratch.
if your serious ill do a little side trip next time im at Norfolk VA.
I have transport already set up
nephew drives for a transport company up and down the east coast.

Re: the boss gave me the OK to look for another car!!!!
 

Well, if Brians car is a possible. Then I would like to pitch my Beretta chassis that I have for sale here on RJ. First, it is not a street car, However, depending on your performance attitude it could be. The Chassis is certified 25.4 just renewed in september, good till 2012. It will run mid sevens 184 MPH with a 1170 HP push. It ran 8.002 170 MPH with a bone 1000 HP engine and a TH400 trans. The car is 1000 pounds lighter than a back half car and will go lot's faster with same power. This car is completely new in 07, paint, differential, struts and steering pieces. The ad # is 1701526, It is the Dark Garnet Metallic one. This package leaves you needing a relatively inexpensive $10,000 900 HP crate motor to run low 8's from the builder of your choice, and leaves $22,000 in you pocket for fuel and or flowers for that wonderful wife of yours. Beast 477 can verify the condition and performance of this chassis if you would like an outside opinion on the quality of this chassis.
Bruce

nice ill have to show a few guys this and tell me what they think.

Boy Brian, that tank of yours sure quick. That engine has a lot of smoke to push that car so fast. That car set up would cost a ton more than $65,000 to recreate even with used parts.
I could not resist the chance to plug my chassis. You never know!
Bruce

u know i Luvssss ya Bruce !

sorry i took the pics and Vids off...the car ain't for sale.....in all my years racing i haver never had a small tire Car this heavy hook so well..as a matter of fact i haven't had a Big tire car hook this well also...lol.
so its just not that i couldn't replace for this price...but Its hard to get one to Work like this one does.....its more Un-common than Common to get a Door car 3,000 lbs with 10.5 tires running 1.10 60fts...with such a small amount of NOS

But the guy who owned it before me had about 100k in the car...Alan Pittman did the chassis..Alan is Ex-promod Driver and one of the premiere chassis Builders in the World...and Not cheap..lol... :shock:

In the spring i am going to Atlanta and experience a little 1/4 Action.. i Looking for some 190mph stuff in the car...should be Fun!!!

Anyhow Good luck with finding your New car..

NP
i understand ill keep looking.
At least ya didnt have me go down there just to turn around lol.

no i wouldn't do that to you...lol