Depends on the size of the motor

hey hammer, do you have any feed on the brodix hv 2007? the runner dividers, look the same as that team g, runners look a little shorter on the team-g.

I have a dart on my 496.
A buddy of mine runs a Team G on his 496, both are untouched out of the box and work very well.

Maybe we just got lucky :roll:

According to our resident intake gurus, they both suck :shock:

For what it's worth.
I had a Team G on a 468 I ran years ago, as with any intake, it responded well to port matching.

Cp

Have not ever played with that intake so can not say

Wait .. if you havent tried anything else how do you know they work well ?? just wondering :wink:

Oh I dont know, my ets'?

It certainly isnt no slouch for a 496 It's running within a tenth of a couple 540's on alky leaving off the transbrake, if that is any indication?


But your right, I dont know, and I suppose I never will.

I dont normally throw $300 to $400 around just to "try" something different.
It took me over 4 years of saving and shopping around just to get what I got.

I made a informed purchase based on what I read and was told by fellow racers and> IMO it works very well.

Cp

Hey Cp, your 496 runs very strong. Every engine is different. If it aint broke don't fix it. Right.

I was just wondering .. if you havent tried anything else it may work better with something else ya never know ;)

A 468/496 can make a lot of hp if done right and are fast as a 540 due to the block weight mostly but when both are done right a 540 will still walk all over a 496 :)

ps .. 454r's can be had for 100-150 bucks to your door all the time..

Intakes
 

I have been Following along with this Deal.
I have Both Intakes sitting here,454R Torker Untouched.And a Fully Ported Team-G.If they dont go anywhere?
CP you are Welcome to try either 1 or both when the Season starts?
Just give me a shout and I will get them to you 1 way or the Other?That way,you have all 3 Bases Covered!
Later
G 8)