- General Discussion
(https://www.racingjunk.com/forums/forumdisplay.php?f=7)
- - gimmie an estimation
(https://www.racingjunk.com/forums/showthread.php?t=20190)
Tod74
03-14-2008 07:51 AM
Originally Posted by sp2816
Also, your 950 carburetor is too small (they actually only flow about 790cfm, because it is a 750 throttle body on a 850 baseplate) and I would change it to at least a 850 and a 1000cfm would be better.
Bill Mitchell
I agree a bigger carb would be better...but I had a 13 to 1, .030 over 454 with bone stock 074 heads in a 3050 lb car with a powerglide and it ran 6.50's in the eighth with a 950 hp holley on it with a victor 454 R. Pulled strong to 6800 rpm. It was probably too small but it worked well on my motor.
P.S. Why the hell are they called a 950 if they flow 790? That sorta pisses me off cause that carb wasn't cheap. :evil:
kw89425
03-19-2008 04:12 PM
if my cam is to big what should i use
ImBack
03-19-2008 08:23 PM
GET-ER-DONE! Inquiring minds need to know. Contact a reputable cam company and tell them what you have and want it to do.
