rob,start at a idle point around 1350 in grear just so the car rows a little w/no break,when you stage the car casses will not be loaded then bring the r's up to 18 to 2000rpm.Stage shallow just flicker the 2nd bulb this will give you that little exter room to launch.If you stay low on the idle it will take more gas to get to 1350rpm and it will loaded the casses.When see the last yellow mash the gas the flash should go to were the convertor stalls, and launchs the car with all the weight transfer. Your cam is big so it might not idle at 1350 so just play with it. RM1