View Single Post
Old 09-12-2009, 06:48 PM
  #85  
Tod74
Senior Member
RACING JUNKIE
 
Join Date: Sep 2007
Posts: 4,137
Default

Originally Posted by shortcake
Originally Posted by shortcake
Here is what he posted he said about the car.....


"here is a list of parts copied directly from here..... so what is not true about the camaro???????????????????

This is a Super Clean 1981 true z28!

this was originally a 4speed car and all pedals are still in the car.

car is a deep blue color with real recaro seats.
295/65/15 drag radial car (new!)
81 Z-28 drag \street rolling chassis
8.5" 10 bolt, Mark williams 35 spline spool and axle kit, 3.90 richmond gear set.
Aluminum pre-load diff cover.
Competition eng slapper bars.
Rancho 8 way adjustable rear shocks.
Comp eng 90\10 front.
Del-a-lum bushings upper and lower control arms.
Convo pro wheels.
Recaro seats.
8 point roll bar.
Rci belts.
4" glasstec cowl induction.
Dual 1\2" fuel systems
T-tops,Rust free, solid and clean
new factory carpet
new headliner

________________________________________
Here is a little info on the engine . I have all reciepts for the engine work including the build sheet from Randalls racing in Chester Va.

408 sbc
eagle crank
6 inch eagle h beams
kb 12.6 to 1 pistons
Dart iron eagle platinum 230 cc heads
bullet racing 645 645 solid roller
7/16 1.5 scorpian roller rockers
Holley keith dorton intake
AED Holley 750 ho modified carb
csi electric waterpump
double roller timing chain
msd digital 6plus
Mallory HEI Dist
Howe radiator
Trans and oil cooler
5500 nitrous converter
Th400 Manual valve body Forward Pattern
Line lock

************Most parts are brand new.... i have not run it at the track yet because I am still tuning the car. there is no reason this car wont go into the low to mid 10s on motor and pretty deep into the 9s on the gas once tuned .************

HMMMMMMMM!!!!
I didn't see low to mid 10s I barely seen 11's

I think the part you are overlooking is the fact that He also told you HE HAD NEVER RAN THE CAR!! Now, unless you believed he had a crystal ball how could he possibly do anything but guess as to what ET it would run? If the parts list on the engine was accurate then he did nothing wrong in predicting the ET....he just was incorrect. I wouldn't have believed low 10's from that list of parts IN THAT HEAVY CAR, I would chalk it up to bench racing /guessing....that isn't a slam on him or the engine. He either exaggerated or guessed wrong but IF that list of parts is correct I don't see where you have any right to complain about the performance..it would be MUCH DIFFERENT if he had TOLD you that the car HAD ALREADY ran those numbers.

JMO on things, but he said he told yoyu 500 hp or slightly more??? 500 HP won't even get a 3500lb car to go low tens.You would need over 600
Tod74 is offline