Originally Posted by bsdracer

Hey Rabbit..

There really isn't much to the other side of the story.. Mike says the heads were perfect and who ever I took them to were idiots.. He refused to do anything - claiming his work was perfect.

He told me -- "Jason just put them on you will make power" -- well Mike Weinle they didn't. Remember too I dyno'd it twice by two different shops.

and BTW, I took it to 4 people.. and talked to several more before sending them to Schmidt.

Schmidt wasn't surprised - in fact, the sales guy told me it wasn't the first set they had to repair that came from Mike Weinle. The only good that made me feel was that I wasn't the only one duped by this guy.

It is costing a small fortune.. but they are saying they will be as good as any set they sell. They need to weld back in material in order then to C&C them. They told me it looked like someone just took a cutter into the bowl... and then didn't do anything else. Told me the valves were wrong in size in several aspects.. the length - circumference - margin.. Even the guide liners need to be replaced.

The result will be seen.. good or bad. As soon as it gets put back together I have time scheduled again at the dyno to see what the difference is.. Dennis Wheets Jr. also is going to flow them first before they go on the motor.