Help identifying what is inside this powerglide
Hi everyone,
I was hoping someone could identify what is going on in my powerglide. I went to change out the transmission gasket and filter, and found what appears to be a solenoid inside the pan attached to the valve body (see "A" in the picture).
The unusual thing about it is that I already have a seperate solenoid outside of the pan that activates the transbrake and is wired to the shifter button (see "B" in the picture).
The part in the pan that looks like a solenoid has two lead wires off of it. One is attached to ground, and the other leaves the transmission through a hole in the case but that wire has been cut. So I imagine that solenoid is not doing anything?
Can anyone make sense of this.
Thanks.
[ATTACH=CONFIG]73[/ATTACH]