Help identify this dual disk clutch/flywheel?
05-29-2022, 07:16 PM
#1
Junior Member
SHOW GUEST
Thread Starter
Join Date: May 2022
Posts: 1
Help identify this dual disk clutch/flywheel?
Okay guys, I chickened out on using this super-trick flywheel/clutch combo on my Triumph TR6 based street toy build. 
Have not found the maker but it appears to be a very high quality piece in excellent condition.
It came from an unfinished road race car from the LA area that apparently was started on a fairly long time ago.
I would like to know who made it, and if they are they still in business.
8.5 Lb. flywheel and 9 Lb. 7-1/2 OD dia. steel clutch insert, 8-3/8 clutch cover assembly.
Have not found the maker but it appears to be a very high quality piece in excellent condition.
It came from an unfinished road race car from the LA area that apparently was started on a fairly long time ago.
I would like to know who made it, and if they are they still in business.
8.5 Lb. flywheel and 9 Lb. 7-1/2 OD dia. steel clutch insert, 8-3/8 clutch cover assembly.
Last edited by RichardSIA; 05-29-2022 at 07:20 PM. Reason: Add pic!
Yesterday, 10:12 AM
#2
Junior Member
SHOW GUEST
Join Date: Jul 2026
Posts: 1
Das sieht nach einem hochwertigen Rennsport-Schwungrad mit passender Kupplung aus. Ohne Herstellerkennzeichnung ist es allerdings schwer zu sagen, von wem es stammt. Früher gab es einige Spezialfirmen, die solche Teile für TR6-Rennfahrzeuge gefertigt haben, von denen heute nicht mehr alle existieren. Schau nach eingravierten Nummern oder Logos auf der Rückseite oder unter dem Kupplungsdeckel. Mit diesen Informationen lässt sich der Hersteller meist deutlich einfacher identifizieren.
