big block tunnel ram in jet boat, need carb help

Reply Subscribe

Thread Tools

04-14-2017, 04:25 PM

tiago

Junior Member

SHOW GUEST

Thread Starter

Join Date: Apr 2017

Posts: 1

big block tunnel ram in jet boat, need carb help

I bought a jet boat with edelbrock street tunnel ram and 2 1850/ I guess 600 cfm carbs, vacuum secondary with side hung floats. they are old and leaking, I want to replace them but I was told by jegs to use 2 double pump carbs with center hung floats. I am concerned about washing cylinders. has comp cam 568/ 578 lift and 292/296 duration, give me some advice, thanks

04-17-2017, 05:28 PM

Swiley383

Senior Member

RACING JUNKIE

Join Date: Apr 2010

Location: White Bluff TN

Posts: 630

I have read vacuum secondary on a tunnel ram won't work right due to low vacuum. Contact Holley or Quick Fuel or some other carb manufacturer and see what they say.

04-18-2017, 09:14 PM

mytmouz

Senior Member

RACING JUNKIE

Join Date: May 2006

Location: Pelahatchie, MS

Posts: 1,004

My old boat had twin 850's on it, and I didn't have any issues, other than keeping fuel in the tank...

02-16-2021, 09:46 PM

lg406

Junior Member

SHOW GUEST

Join Date: Dec 1969

Posts: 2

Quote:

Originally Posted by Swiley383

I have read vacuum secondary on a tunnel ram won't work right due to low vacuum. Contact Holley or Quick Fuel or some other carb manufacturer and see what they say.

Not true. Manifold vacuum has nothing to do with vacuum secondary. In fact it is recomended you use VS carb on your setup. BTW: 1850 holley is a 600 cfm carb.

02-18-2021, 05:33 AM

BigBlockMark

Senior Member

MASTER BUILDER

Join Date: Mar 2014

Posts: 244

I would consult a well known custom carb builder and have him spec and build you carbs. Less grief in the long run. Mark Whitener in Orlando Florida is who I recommend. Just google jmarkaudio. He also has a fuelsystems forum online. He has helped me on custom engine carbs..Prices of new Holley carbs are going up again March.