Rims with screw holes
06-06-2020, 08:47 AM
Junior Member
SHOW GUEST
Thread Starter
Join Date: Dec 2014
Posts: 3
Rims with screw holes
I have an extra set of rims that I used slicks on, screwed in. Can I remove the slicks and screws and run M/T Pro Bracket drag radials with the holes open? Will it hold it's seal? I don't think you can screw in drag radials because of the belt.
06-07-2020, 06:40 AM
Senior Member
MASTER BUILDER
Join Date: Mar 2014
Posts: 244
If you try it and they leak, you can have the holes welded up easily.
06-07-2020, 01:49 PM
Junior Member
SHOW GUEST
Thread Starter
Join Date: Dec 2014
Posts: 3
Thanks BigBlockMark. I heard some people use a glue or sorts to keep the seal with drag radials..... true?
06-10-2020, 09:45 AM
Senior Member
MASTER BUILDER
Join Date: Mar 2014
Posts: 244
They do glue radials because you cannot screw them, but I don't know what they use. You could go to the "Yellow Bullet" Forum and ask there.
11-15-2023, 08:10 AM
Junior Member
SHOW GUEST
Join Date: Nov 2023
Posts: 4
Quote:
Originally Posted by
BigBlockMark
If you try it and they leak, you can have the holes welded up easily.
thanks i was looking for that
Last edited by FergusonnVict; 11-15-2023 at 08:47 AM .
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off