who builds the best 23* head for drag racing?
#1
Senior Member
MASTER BUILDER
Thread Starter
Join Date: Oct 2003
Posts: 144
who builds the best 23* head for drag racing?
Who builds the best 23* head for drag racing?
I have heard CFE makes a pretty goof raised runner head but I dont see it on their web site.
All Pro are supposed to be top notch, any others worth a look at?
Al
I have heard CFE makes a pretty goof raised runner head but I dont see it on their web site.
All Pro are supposed to be top notch, any others worth a look at?
Al
#2
Senior Member
SENIOR BUILDER
Join Date: Oct 2004
Location: Woodbridge, VA
Posts: 101
All Pro hands down, .. .. no other comes close for the money, ..
The CFE's are nice but 2x the price of a good CnC ported All pro.
All pro will flow around 370cfm, ..
I have a new cnc program I'm working up for a customer and have the
all pro castings in stock, .. but they ain't cheap.
Curtis
The CFE's are nice but 2x the price of a good CnC ported All pro.
All pro will flow around 370cfm, ..
I have a new cnc program I'm working up for a customer and have the
all pro castings in stock, .. but they ain't cheap.
Curtis
#3
Senior Member
RACING JUNKIE
Join Date: May 2003
Location: Coldwater, MI
Posts: 2,998
Originally Posted by cboggs
All Pro hands down, .. .. no other comes close for the money, ..
The CFE's are nice but 2x the price of a good CnC ported All pro.
All pro will flow around 370cfm, ..
I have a new cnc program I'm working up for a customer and have the
all pro castings in stock, .. but they ain't cheap.
Curtis
The CFE's are nice but 2x the price of a good CnC ported All pro.
All pro will flow around 370cfm, ..
I have a new cnc program I'm working up for a customer and have the
all pro castings in stock, .. but they ain't cheap.
Curtis
x2 All Pro is in a class of there own here
#5
Senior Member
DYNO TECH
Join Date: Feb 2004
Location: Leonard, Texas
Posts: 414
Originally Posted by cboggs
All Pro hands down, .. .. no other comes close for the money, ..
The CFE's are nice but 2x the price of a good CnC ported All pro.
All pro will flow around 370cfm, ..
I have a new cnc program I'm working up for a customer and have the
all pro castings in stock, .. but they ain't cheap.
Curtis
The CFE's are nice but 2x the price of a good CnC ported All pro.
All pro will flow around 370cfm, ..
I have a new cnc program I'm working up for a customer and have the
all pro castings in stock, .. but they ain't cheap.
Curtis
What can you do with a set of 23 deg AFR 227's I'm running on this 409 SB? Trying to decide if I want to put more money into them, buy a set of 15 deg or SB2's?
Thanks, Bill
#6
Senior Member
SENIOR BUILDER
Join Date: Oct 2004
Location: Woodbridge, VA
Posts: 101
Originally Posted by altune
what does a set up set of heads run for valve lift in the .800's ?
stainless valves.
tai retainers, pac alloy springs.
??
Al
stainless valves.
tai retainers, pac alloy springs.
??
Al
I'll drop you a PM, .. I don't do price quotes on the net, ..
Bill, .. I don't think you want to spend much more on the AFR's if
you're already thinking about 15* stuff, .. I wouldn't buy the used
nascar sb2.2 stuff for a drag engine unless you plan on putting
more money into them to get them right for a drag engine.
I build a nice 18* head that is running faster then many nascar sb2
engines in dragsters, ..
Curtis
#7
Senior Member
MASTER BUILDER
Thread Starter
Join Date: Oct 2003
Posts: 144
what ever happened to the big deal with Edelbrock heads and people switching to them for 23* stuff ? I think they had some major builders helping them design a good setup.
Yes All Pro, Niiiiiiiiceee stuff.
pricy but you get what you pay for
Al
Yes All Pro, Niiiiiiiiceee stuff.
pricy but you get what you pay for
Al