which rockers
#1
Member
CRAFTSMAN
Thread Starter
Join Date: Apr 2006
Posts: 62
which rockers
Hey guy's need some help, putting together a 383 with aust. racer-pro heads and having trouble finding shaft rockers to fit. There website say's they're 40/60 but i'm a little confused. I sort of get the 40/60 thing, do the stud spacings change aswell or not. Here is what i measured them at;
studs= ex 1.770 in 3.016 in 1.770 ex 2.221 ex 1.770 in 3.016 in 1.770 ex
valves= ex 1.907 in 2.777 in 1.907 ex 2.197 ex 1.907 in 2.777 in 1.907 ex
Can someone suggest a jesel/t&d pt# or what heads these would match so i can order some.
studs= ex 1.770 in 3.016 in 1.770 ex 2.221 ex 1.770 in 3.016 in 1.770 ex
valves= ex 1.907 in 2.777 in 1.907 ex 2.197 ex 1.907 in 2.777 in 1.907 ex
Can someone suggest a jesel/t&d pt# or what heads these would match so i can order some.
#2
Senior Member
RACING JUNKIE
Join Date: Jan 2006
Location: La.
Posts: 2,890
I don't know exactly which heads you have but i think the Brodix 60/40 heads take the .250 intake off set rockers. I know my Brodix 10's do and T&D has a great customer support system, unlike Jessel who to me just don't really care.
Below is the link to T&D maybe you can pick out your heads by the #'s and it will tell you which rockers you need. The T&D's that i got are really nice.
JMO
Zip.
http://www.tdmach.com/page6-7.shtml
Below is the link to T&D maybe you can pick out your heads by the #'s and it will tell you which rockers you need. The T&D's that i got are really nice.
JMO
Zip.
http://www.tdmach.com/page6-7.shtml
#3
Member
CRAFTSMAN
Thread Starter
Join Date: Apr 2006
Posts: 62
I like the T&Ds aswell Zip, i put them on my v6. Racer-pro has no customer service either, someone did say they were a knockoff of a brodix but can't remember which ones so i posted measurements hoping some head guys might know.
You have a pm Zip.
You have a pm Zip.
#4
Senior Member
RACING JUNKIE
Join Date: Jan 2006
Location: La.
Posts: 2,890
Re: which rockers
Originally Posted by qiksix
Hey guy's need some help, putting together a 383 with aust. racer-pro heads and having trouble finding shaft rockers to fit. There website say's they're 40/60 but i'm a little confused. I sort of get the 40/60 thing, do the stud spacings change aswell or not. Here is what i measured them at;
studs= ex 1.770 in 3.016 in 1.770 ex 2.221 ex 1.770 in 3.016 in 1.770 ex
valves= ex 1.907 in 2.777 in 1.907 ex 2.197 ex 1.907 in 2.777 in 1.907 ex
Can someone suggest a jesel/t&d pt# or what heads these would match so i can order some.
studs= ex 1.770 in 3.016 in 1.770 ex 2.221 ex 1.770 in 3.016 in 1.770 ex
valves= ex 1.907 in 2.777 in 1.907 ex 2.197 ex 1.907 in 2.777 in 1.907 ex
Can someone suggest a jesel/t&d pt# or what heads these would match so i can order some.
Zip.