Powerglide pump
#2
Junior Member
APPRENTICE
Join Date: Mar 2006
Posts: 11
You can put the glide shaft right back in with no other changes. the diference is the busging that goes in the end of the stator shaft to support the turbo shaft. You can remove the bushing, but it is not nesecary because the glide shaft is smaller diamater and will not toutch the bushing.
Rob
Rob
#3
Senior Member
DYNO OPERATOR
Thread Starter
Join Date: Aug 2007
Location: Lost Creek, WV
Posts: 533
Originally Posted by Robstclair
You can put the glide shaft right back in with no other changes. the diference is the busging that goes in the end of the stator shaft to support the turbo shaft. You can remove the bushing, but it is not nesecary because the glide shaft is smaller diamater and will not toutch the bushing.
Rob
Rob
TS1955