worn brass dist gear
01-21-2015, 02:30 PM
Junior Member
SHOW GUEST
Join Date: Dec 1969
Posts: 4
Not my picture but this shows the idea perfectly. I use a triangle shaped file and cut the slot about .020" deep. Time the groove so the oil goes onto the gear right before it meshes with the cam.
06-04-2021, 01:51 AM
Banned
APPRENTICE
Join Date: May 2021
Posts: 10
Quote:
Originally Posted by
scott0408
running a 421 sbc after a year of
Quote:
Originally Posted by
scott0408
Speed Test racing doing some work on it & found the dist gear worn not extremly bad but still makes me worry about it any ideas
. It's not uncommon. You can usually pick that up with a timing light is will show eratic timing when you check the timing. Hope this helps.
Last edited by eerode; 06-04-2021 at 01:58 AM .
12-24-2021, 10:52 PM
Junior Member
SHOW GUEST
Join Date: Dec 2021
Posts: 1
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off