painting graphics
#1
Senior Member
EXPERT BUILDER
Thread Starter
Join Date: Dec 2002
Location: spring creek nv.
Posts: 329
painting graphics
i have a 06 chevy hhr that i want to do flames or something on the front end to add some flash to it..what is the right way to prep and paint over the factory paint..
#2
Member
JUNIOR BUILDER
Join Date: Mar 2006
Location: Illinois
Posts: 96
I prefer to sand the whole panel rather than leave a clear edge around the graphics, unless you plan on a pin stripe around it. You can use a gray scotch brite, or 600 wet or dry with soap and water, followed with a paint prep solvent wiped with a lint free towel. Tack and paint. Clear whole panel after. the clear will cover any 600 scratches.
If it's not dull, it's not ready to paint. The shine will come back with the clear.
If it's not dull, it's not ready to paint. The shine will come back with the clear.