Powerglide Question
07-15-2008, 03:44 PM
07-15-2008, 04:00 PM
Senior Member
RACING JUNKIE
Join Date: May 2006
Location: Pelahatchie, MS
Posts: 1,004
07-15-2008, 04:00 PM
Senior Member
RACING JUNKIE
Join Date: Feb 2006
Location: Lenoir City Tennessee
Posts: 864
thats where the speedometer cable goes
07-15-2008, 04:16 PM
Junior Member
APPRENTICE
Thread Starter
Join Date: Jun 2008
Posts: 15
Ok, it's a little loose and leaking a little fluid. I didn't want to tighten it if it was going to cause problems.
07-16-2008, 04:09 AM
Senior Member
EXPERT BUILDER
Join Date: Aug 2005
Location: Tell City, IN
Posts: 356
I always put a freeze plug in it... 8)
07-16-2008, 05:57 AM
Senior Member
RACING JUNKIE
Join Date: Jul 2007
Location: Florida
Posts: 635
You can pull it out and put an o-ring on it. Also a small seal inside to seal the gear.
07-16-2008, 08:59 AM
Junior Member
APPRENTICE
Thread Starter
Join Date: Jun 2008
Posts: 15
Probably a dumb question, but why would it start leaking all of sudden? I probably put 60 passes on it with no problem.
07-16-2008, 04:36 PM
Junior Member
APPRENTICE
Join Date: Nov 2005
Posts: 16
Originally Posted by us7race
I always put a freeze plug in it... 8)
I agree, remove all the speedo "stuff", install I think it's a 3/4 freeze plug in and call it done.
07-19-2008, 09:43 PM
Senior Member
SENIOR BUILDER
Join Date: Oct 2005
Location: Wellington , New Zealand
Posts: 122
If drag car. As above. Remove and install a frost plug. If not, Auto meter make a good speedo sending unit for the glide
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off