sbc dart pro1s best place to get ported
01-31-2009, 03:05 AM
#1
Junior Member
SHOW GUEST
Thread Starter
Join Date: Jul 2007
Posts: 3
sbc dart pro1s best place to get ported
hello all, i have a sbc 421 stroker motor with a set of 230s dart pro 1s off the shelf. im wanting to send off to be worked with the intake..(a victor jr) looking for the best place for the dallor..please folks im not trying to buy another set or brand i see alot of people use the darts..just wanting to get the most out of what i got...any info on a place that has had good luck with the darts.. :?:
01-31-2009, 05:19 AM
#2
Senior Member
RACING JUNKIE
Join Date: May 2003
Location: Coldwater, MI
Posts: 2,998
http://www.arnoldcylinderheads.com/
Jerry Arnold is one of the top guys in the country prices are good and work is above and beyond !
Jerry Arnold is one of the top guys in the country prices are good and work is above and beyond !
01-31-2009, 07:30 AM
#4
Senior Member
RACING JUNKIE
Join Date: Jul 2007
Location: Florida
Posts: 635
A Victor Jr's runners are too small to run on a 421 especially with large runner heads like those, you will waste your money sending the heads out. Here is a guy that will do a great job at a reasonable price and can discuss a better intake like a Super Victor.
Speier Racing Heads
420 East 8th
Hays, KS. 67601
785 628-6673
Chad also runs this site.
http://www.1320techtalk.com/
Speier Racing Heads
420 East 8th
Hays, KS. 67601
785 628-6673
Chad also runs this site.
http://www.1320techtalk.com/
01-31-2009, 07:35 AM
#5
Senior Member
EXPERT BUILDER
Join Date: Aug 2005
Location: Tell City, IN
Posts: 356
