Yet another head question

Thread Tools
 
Old 11-24-2007, 04:47 PM
  #21  
Tod74
Senior Member
RACING JUNKIE
 
Join Date: Sep 2007
Posts: 4,137
Default

Originally Posted by rabbit
Hey guys I am not gonna get mad at anyone for saying what they think would work. I asked you what would work and believe me I know that the tunnel ram is hurting it. I have a set of darts on the way today but I think they are too big for my combination. But you know how traders do things (pass from one thing to the next until you get what you are looking for). Anyway the ones I am picking up today are Darts with 64CC cumbustion chambers, 210cc intake runners, 2.05 intake valves, 1.65 ex valves and some port work and cut surfaces which I think will take the chambers down around 58-60cc. I am thinking that this is too much and will only hurt the low end performance. I am thinking I need more along the lines of smaller intake runner (around 180-190 cc) and no bigger than 2.02/1.6 valves. Does this seem right?

Ok what cam are you guys thinking would work for what I am doing here. If nothing else works out the 400 is last resort but we do have a couple sitting in my dad's garage if it comes down to it. :wink:
Thank you all again, Scott
the 400 would be my FIRST resort if it were mine.
even if I didn't have a low end problem I would still run the 400. I love 400 small blocks.
Tod74 is offline  
Old 11-25-2007, 07:50 AM
  #22  
jmarksdragster
Senior Member
RACING JUNKIE
 
jmarksdragster's Avatar
 
Join Date: Jul 2007
Location: Florida
Posts: 635
Default

I second the 400. Much faster. Go with an Iron Dart head with 200 cc runners. Go with the smallest chambers you can get. An iron head is faster than aluminum all else being equal. It retains heat better. And the 400 might like that tunnel ram.
jmarksdragster is offline  
Old 11-25-2007, 08:38 AM
  #23  
Racefab57
Senior Member
DYNO OPERATOR
 
Join Date: Nov 2006
Location: NC
Posts: 557
Default

My reply was based on some experience and to use more of what he already had !!!!!!!!!!!!!!!!! But I agree with the 400 deal !!!!!!!!!!!!!!!!!!!!! David.
Racefab57 is offline  
Old 05-28-2021, 02:09 AM
  #24  
eerode
Banned
APPRENTICE
 
Join Date: May 2021
Posts: 10
Default

You'd probably get into the mid sevens by just putting Nox Vidmate VLC on a single plane intake and running a single carb like a 750 double pumper.

Last edited by eerode; 06-01-2021 at 01:27 AM.
eerode is offline  
Old 06-29-2023, 08:56 AM
  #25  
annamarks
Member
MASTER JOURNEYMAN
 
Join Date: Jan 2023
Posts: 44
Default

Since the picture I added turndowns to them as well pointing 45* down and out. I was thinking around 60-64 cc heads were what I was needing but still wondering if there is any better than the next.

Last edited by annamarks; 07-03-2023 at 06:28 AM.
annamarks is offline  
Old 05-26-2024, 06:45 PM
  #26  
xslongancom
Junior Member
SHOW GUEST
 
Join Date: May 2024
Posts: 1
Default no i like it

no i like it
xslongancom is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -