35 spline alxe free play question
#1
Member
CRAFTSMAN
Thread Starter
Join Date: Sep 2006
Posts: 62
35 spline alxe free play question
i was running strange 35 spline spool and axles, and just got from moser a new set of axles with the 5/8 studs. the play is sloppier than the original strange axles. i put a dial indicator on the stud and came up with .032 thousands of play. does any one know what is axceeptable. i just dont want to go by what mosher says.
#3
Senior Member
RACING JUNKIE
Join Date: Feb 2004
Location: san antonio, texas
Posts: 1,233
you can call strange for tech, their good guys http://www.strangeengineering.net/
or
tom's differential, good knowledge
http://www.tomsdifferentials.com/
let me know what worked, that does sound like alot of play, never
had that problem, good luck :wink:
or
tom's differential, good knowledge
http://www.tomsdifferentials.com/
let me know what worked, that does sound like alot of play, never
had that problem, good luck :wink:
#7
Senior Member
EXPERT BUILDER
Join Date: Aug 2005
Location: Tell City, IN
Posts: 356
From what I understand Mosier parts vs Strange Parts are not interchangable.. Like using Mosier Axles in a strange spool ect.
Have not tried it but that is what I had been told at one time.
Have you talked to Strange about this? If it were me I would just to get their opinion.
Have not tried it but that is what I had been told at one time.
Have you talked to Strange about this? If it were me I would just to get their opinion.