New Combo
#1
Senior Member
RACING JUNKIE
Thread Starter
Join Date: May 2003
Location: Coldwater, MI
Posts: 2,998
New Combo
I put a 468bbc in my dragster and wanted to share what it did.
stock 454 2 bolt block
GM steel crank
Eagle H beams Rods
Ross 13:1 pistons
Dart 355 fully cnc'd heads
Weiand 4500 intake with minor work
APD 1150 Alky Carb 196 jets
2 1/4 to 2 3/8 with 4" collector headers
Star Vac. Pump
8" BTE Conv I had laying around from a 355sbc I used to run. 5800 stall
It ran 5.26@130 & 8.29@160
DA was 3600ft temp was 92 degrees
This car weighed 2011 with aftermark Dart block not sure what it weighs now. I have a few bugs to work out, had a set of old gas short reach plugs laying around I put in it and I am going to lean up the carb. I broke my bigger motor and got a good deal on the short block is why the big heads and carb. I've never seen anyone put this big of head or carb on this small of a motor so I thought I'd share what it did.
stock 454 2 bolt block
GM steel crank
Eagle H beams Rods
Ross 13:1 pistons
Dart 355 fully cnc'd heads
Weiand 4500 intake with minor work
APD 1150 Alky Carb 196 jets
2 1/4 to 2 3/8 with 4" collector headers
Star Vac. Pump
8" BTE Conv I had laying around from a 355sbc I used to run. 5800 stall
It ran 5.26@130 & 8.29@160
DA was 3600ft temp was 92 degrees
This car weighed 2011 with aftermark Dart block not sure what it weighs now. I have a few bugs to work out, had a set of old gas short reach plugs laying around I put in it and I am going to lean up the carb. I broke my bigger motor and got a good deal on the short block is why the big heads and carb. I've never seen anyone put this big of head or carb on this small of a motor so I thought I'd share what it did.
#2
you got close to what i have in the 67 Camaro..except mine is.125 over (511 ci) with a callies stealth crank 4.25 stroke
and eagle rods.
braswell 1050 dominater.
l love the way mine runs...3,000lb car on foot brake was a 6.07 at 115 mph..now have newer tires and a trans break..hope to go low 5.90's..all on motor..
Brian
and eagle rods.
braswell 1050 dominater.
l love the way mine runs...3,000lb car on foot brake was a 6.07 at 115 mph..now have newer tires and a trans break..hope to go low 5.90's..all on motor..
Brian
__________________
Bjuice..
"I'M YOUR HUCKLEBERRY ! "
Bjuice..
"I'M YOUR HUCKLEBERRY ! "
#3
Member
JUNIOR BUILDER
Join Date: Sep 2005
Location: East Texas
Posts: 86
Re: New Combo
Originally Posted by hammertime
It ran 5.26@130 & 8.29@160
DA was 3600ft temp was 92 degrees
I've never seen anyone put this big of head or carb on this small of a motor so I thought I'd share what it did.
DA was 3600ft temp was 92 degrees
I've never seen anyone put this big of head or carb on this small of a motor so I thought I'd share what it did.
#4
Senior Member
RACING JUNKIE
Thread Starter
Join Date: May 2003
Location: Coldwater, MI
Posts: 2,998
Made a few more changes took off 2" carb spacer and changed fuel pressure 5.19@130 this weekend 1/8th mile. Really bad air still cant wait to see decent air and a good track.