Need 5.5" 3 disc in 1 1/8 -26 Spline for GM Richmond Super T-10
02-12-2017, 09:25 AM
#1
Junior Member
SHOW GUEST
Thread Starter
Join Date: Feb 2017
Posts: 3
Need 5.5" 3 disc in 1 1/8 -26 Spline for GM Richmond Super T-10
Dear Racing Junkies,
does someone know where to get 5.5" disc with 1 1/8" - 26 spline input ?
Got a Quartermaster with 1 1/8-10 spline but want me to buy a new transmission like a Richmond super t 10 or a Jerico.
Quartermaster has only 1 5/32 - 26 spline 5.5" 3 disc
Tilton only 1 1/8"-10 Spline in 5.5"
Any help is welcome.
does someone know where to get 5.5" disc with 1 1/8" - 26 spline input ?
Got a Quartermaster with 1 1/8-10 spline but want me to buy a new transmission like a Richmond super t 10 or a Jerico.
Quartermaster has only 1 5/32 - 26 spline 5.5" 3 disc
Tilton only 1 1/8"-10 Spline in 5.5"
Any help is welcome.
03-28-2017, 09:07 AM
#2
Junior Member
SHOW GUEST
Thread Starter
Join Date: Feb 2017
Posts: 3
Dear Racing Junkies :-)
Nobody could help me ,so far.
Now i found out that 1 1/8"-26 and 1 5/32-26 spline is the same size of input shaft.Known as GM 26 spline.
After weeks of research i found this.
[ATTACH=CONFIG]185[/ATTACH]
Not even Summit,ACE Clutches, Richmond gear,JEGS and some E-bay dealers could help me and just said get a 1 5/32-26 and you are fine :-)
I hope this info helps someone else as well.
Nobody could help me ,so far.
Now i found out that 1 1/8"-26 and 1 5/32-26 spline is the same size of input shaft.Known as GM 26 spline.
After weeks of research i found this.
[ATTACH=CONFIG]185[/ATTACH]
Not even Summit,ACE Clutches, Richmond gear,JEGS and some E-bay dealers could help me and just said get a 1 5/32-26 and you are fine :-)
I hope this info helps someone else as well.
Last edited by Uwe; 03-28-2017 at 09:10 AM.
