another set of procomp heads
#1
Junior Member
APPRENTICE
Thread Starter
Join Date: Jul 2009
Location: Farmington,Illinois
Posts: 24
another set of procomp heads
OK just to start ,no fighting over whether junk or not junk . Just need some info , got a set of these procomp heads 202/160s 210cc on an engine I bought. The heads are going to be sold cheap to a broke bracket racer, anyway can anyone tell me if this set is the early set or updated set? PC 3003-0707-0159? flea bay sells the ones with a PC 3000 serial number I just want to be straight up when these get sold , Remember dont want anyone to get there feelings hurt :lol:
#2
Senior Member
RACING JUNKIE
Join Date: Feb 2004
Location: san antonio, texas
Posts: 1,233
they have a web site and a phone number and the guys there
are pretty helpful, http://www.procompelectronics.com/
are pretty helpful, http://www.procompelectronics.com/
#4
Senior Member
RACING JUNKIE
Join Date: Nov 2004
Location: St. Louis, Missouri
Posts: 661
You might get a better $$$$ for those heads if you can find a weekend warrior building a little 350 to 450 hp pro streeter. :wink:
Ya know, the kind of guy that would think it is cool just to have a set of aluminum heads. Thats a guy that will be more than happy with the propormance of those heads and probably pay a few xtra bucks to have them.
They are a good head to upgrade to if you have a steel headed crate motor....
Ya know, the kind of guy that would think it is cool just to have a set of aluminum heads. Thats a guy that will be more than happy with the propormance of those heads and probably pay a few xtra bucks to have them.
They are a good head to upgrade to if you have a steel headed crate motor....
#5
Junior Member
APPRENTICE
Thread Starter
Join Date: Jul 2009
Location: Farmington,Illinois
Posts: 24
Yea I am going to put them in the local paper. I wrote to procomp gave them the part number, they must be so bad That they wont even respond as to if they are new or old style castings. I did pick up a used stud girdle and some rockers to throw in on the deal though. Maybe they can make big book ends for my shelves in the shop. :idea: