For sale is a 1996 BMW 328i. It is a push button start s54 swapped e36 meant for track use only. No work needs to be done; the vehicle is ready to drive as it sits now. It is effectively an e36 m3 as I have changed all the non-m3 body/suspension parts with m3 ones (trailing arms/rear bumper/front knuckles/etc).
The only thing original to this vehicle is the chassis itself. The rear subframe and trailing arm pockets have been reinforced. All bushings have been replaced with poly. The car has had virtually every component/part on it replaced in the last 4 years (wheel bearings/bushings/control arms/bolts/nuts/etc). Fuel system has been reworked so there is no fuel starvation in high G turns. I know there is a ton of stuff I am glossing over. Please feel free to ask any questions and I will provide whatever information I can.
This car is very light and very fast. It can run down vehicles many times its cost. The setup very forgiving and has a ton of mechanical grip. I love driving this thing.
Sadly, I don’t really have much time for this thing anymore as I have a new family. I’d really like to see it go to a good home where it will get the use it was built for. I have included links for more photos and one of my more recent on-track videos.
Asking 40k obo as there is a lot of car here for the money. I’m open to any reasonable offer. Vehicle is titled and I do have it in hand. Depending on if/when it sells the vehicle may see another event or two.
Current major components:
s54b32 (rebuilt 1.5 years ago)
Full Roll Cage
MK60 ABS Unit w/ e46 m3 Master + Booster
3.46 Gears w/ LSD
ZF 5-speed Trans
MCS 2WNR
Alcon 355 BBK Front and Rear (e46 m3 sizing)
PFC332 + PFC331 (20mm thick Pads)
285/35/18 Nanking CR-S
18x10 ET25 Bimmerworld TA8S
Google Drive Photos:
https://drive.google.com/drive/folders/1DYvhBKI7sW1_Rt2n2dwF_Tkl9QjQVK_S?usp=drive_link
On Track @ VIR: (pre-wrap and some aero)
https://youtu.be/33C8m3nlbc8?si=3sPKqrs1DDI-Yb8n