Mopar Mega block starter clearance issues
#1
Junior Member
APPRENTICE
Thread Starter
Join Date: May 2014
Posts: 18
Mopar Mega block starter clearance issues
I have a fresh 588 in the Dodge using a front & mid plate with an Ultrabell and a Glide. All is well so far except I am having starter clearance issues... The starter hits the block re-enforced area (I have 2 high torque starters, they both hit). I can install the shims that came with the JW Ultrabell, but then the starter is too far away. Any one else run into this issue?
Thanks,
John
Thanks,
John